Our Faux Brick Wall Using German Schmear

Once upon a time, doing a faux brick feature wall was never even a twinkle in my eye. We had a spare bedroom for guests in our finished basement. Not all that long after we gained that bedroom with our basement renovations, I started a business. And this business required a lot of STUFF! Fast forward to 2019 and SPACE IS AT A PREMIUM in said basement. (Update to 2020: space is even more a premium!)

I started this year desperately searching for ways to find space. Space to create, host workshops, have an office, allow two employees to have room to work, store our subscription box supplies, store our custom order and workshop supplies. Oh, and we still needed space for our family to spend time down there also!

What started this idea?

At the start of 2019, I decided that, until a separate space (garage, rented space, etc.) comes along, I needed to make do with what I have and maximize the heck out of it. So, since there is a large window in the spare room…DING DING DING…the lightbulb went on… We could eliminate our spare room and convert it into a staging room complete with all of my styling accessories. A stationary wall in front of which I can get photographs was the main goal with the faux brick paneling idea.

My husband is the best.

If you’ve been following me on social media for a while now, you know that my husband (let’s call him Mr. Home Matters, or MHM for short – hey, that’s the same initials as MY Home Matters!) is pretty awesome. He went down a pretty serious path about a year ago by building me a sliding staging wall over in the unfinished, window-less side of the basement (aka my dungeon-esque workshop).

MHM was totally onboard with me doing a feature wall in the soon-to-be-former spare room (this is huge for him…because I have been known to change my mind a time or two). Of course, I assured him it would be one that could remain even if/when the room goes back to being an actual room for guests. I mean I love the idea of having a feature wall as a backdrop behind a headboard! It’s probably the most character (when it comes to the actual bones of our home) that we’d have anywhere in the house!

(July 2020 update…I have tried to add a lot more (inexpensive) character to the house this year with faux wood beams and a faux wood front door. In addition, I updated our mantel in our bedroom and added peel and stick shiplap in several rooms.)

I narrowed the endless options down to two…

Keeping in mind the purpose of this wall was to be good for styling furniture, signs and other home décor in front of it, those options were A) shiplap and B) doctored up faux brick. And then I asked my followers on Facebook and Instagram to help me decide. The overwhelming majority chose shiplap…not a surprise. However, the more I thought, the more I felt in my gut that brick was the way to go. So, decision made. I’ve done enough projects to learn that you ALWAYS should follow your gut.

The time had come…meaning time to hop on the BLOGwagon. Time to quit making excuses and start. Surely there is someone out there interested in what I have to offer in terms of home décor and DIY so if this can help one person, then it’s a win!

Materials needed (my wall was 10’7” wide and just under 7 ft tall):
  • 4×8 Faux Brick Panels (I purchased mine from The Home Depot) $33.78/each and I needed three of them
  • Joint Compound (I used Sheetrock All Purpose 3.5 Qt Pre-Mixed Joint Compound) and I scraped EVERY SINGLE BIT I could out of that pail for this sized wall!
  • Putty knife or knives (I used one 6” wide)
  • Nail gun (we used 1.25” nails)
  • Liquid nail (IF and only IF you intend to have this wall be up for a long time…as I said earlier, I tend to change my mind more frequently than the average person so it was my suggestion to just nail it and not use glue…but my husband and I both liked it so much that he actually said we should have used glue!)
  • Baby wipes or damp paper towels/cloths
  • Painter’s tape
  • Circular saw, wallboard saw, utility knife
  • Crown molding or trim for the top
  • White Paint (I used Valspar’s Signature brand in a color called Bistro White because that is what I had on hand) for a white wash over the brick, if you choose to do so
  • Trim paint (I had some leftover from our basement remodel – just a regular trim paint in semi-gloss)

These are the wall boards we chose from Home Depot.

First, decide where you’ll be starting to put the wallboards…

Will you work from left to right? Maybe you want to center one in the middle of the wall and then work on either side?  We opted to start at the left side of the wall and move to the right, so we had two full sheets and had to cut down the last sheet. Not only did MHM measure floor to ceiling (and we did have a slight slant to our ceiling) and cut off the excess from the height, but then he measured and marked exactly where the outlet needed to be cut out.

Next, attach the first wallboard to the wall.

We used brad nails but you could first use liquid nail if you want this to be more permanent. Be sure to get the nails into the studs and going down each stud every few bricks. Move on to the next panel and the next until all are up and pushed right up next to each other.

You will need to work on lining up the grout lines – we found that we had to shave off about ¼ inch of each of the second two panels AFTER they were cut to height in order to make the grout lines match up. But luckily that ¼ inch didn’t make enough of a difference in the overall height of the board. One thing we kept in mind was that we were planning to add a piece of trim at the top to cover/hide any gaps. So we knew we had a little wiggle room!

man holding up a faux brick panel on wall

faux brick paneling covering a blue wall

Once all three boards were up and secured to the wall, MHM was relieved of his duties. The next morning I was chomping at the bit to get started with the German Schmear technique!

I thought this next step was the most fun…

I started by putting painter’s tape on the two side walls at the corners of the room so that I didn’t have to worry about getting mud on those walls. Next, I applied a generous amount of drywall compound to a section of the wall (using a putty knife). Working my way from the left to the right of the wall, I started to get giddy.

I applied enough of the drywall mud to make sure to fill in the mortar joints completely and then I played with the amount that stayed on the actual surface of the bricks. To make sure it had a random feel, I worked the knife in all directions.

Laura Kleber beginning the process of German Schmear

applying drywall spackle as part of German Schmear technique

After I did about a 2×2 foot section, I stepped back to see how I liked it and added more or scraped away more in areas. I began to get the feel of it and kept working my way down the left-most panel across to the right. This was FUN!

What about those seams?

My research seemed to show me that many people first caulked the joints between the wallboards. OR they started there with the drywall mud, making sure to cover the joint the entire way down. However, I still felt like I could see the joints in several of the tutorial pics that I came across and this was my biggest fear with this project. I definitely did not want to see the joints!

My husband convinced me to not use the caulking and just apply the mud as usual. So when I got to that joint between the first and second boards, I continued as normal and just added a very slight extra layer over the bricks themselves. Not all bricks but some. And the mortar joints had to be filled completely anyway, so that covered the joint in those spots (at least it worked for me like that)! I am pleased with the outcome at the joint lines!

Time will tell whether there will be any type of settling. But at this point, I was in the zone… I wasn’t quitting until I had this wall totally German Schmearified! The photos below show me pointing to the two places where the wall board seams were.

finger pointing at seams in German Schmear technique

Finishing touches…

Once I got the entire wall done, I went back to the gaps on either side of the wall (left and right sides of the wall). Those gaps needed to be filled with drywall mud. (This is why the painters’ tape is super important if you don’t want to mess up your other walls!) I had exactly the right amount of mud for this sized wall, as you can see in this photo.

After letting the entire wall dry for almost 24 hours, I “sealed” in the drywall mud by applying a white-wash over top. If you do not seal it, there will be a dusty film that can brush off on anything that touches it. I had about ¼ quart of Bistro White leftover from another project and I added another ¼ to ½ can of water and mixed to water the white down. Then I generously applied it with a paint brush (painting horizontally) across the entire wall, one section at a time. This also allowed me to tone down the red that was still coming through… which I LOVED, might I add. BUT, I was worried the red peeks of brick showing through might interfere with some of my furniture that would be styled in front of it.

Perhaps I will do this again in another area of my home and, when the time comes, I’ll go for more of an exposed brick look. This project needed to be more subtle.

I was out of my comfort zone on this next step but I did it nonetheless!

The last step was to add the crown molding at the top of the wall to cover the uneven gap that was showing. I chose an inexpensive and unfinished style (nothing too large). Before applying some glue and nailing it into the studs with my brad nailer, I applied primer.

I had to cut a second piece to fit since the pieces were not long enough for the entire wall. Once both pieces were up, drywall spackling filled the gap between the pieces and to hide the nail head. (I did sand this down smoothly once dry before moving on.)

Once that was dry, I raided the paint shelf and found JUST BARELY enough of the same paint I had used on all of our other basement trim… YEEEESSSSSSS!!

There was once a point in time where I was organized to a fault… and today it paid off! Look at those fancy labels I even created! For a brief moment, the skies parted and the sun poured down while the angels sang. I basked in the glory of my inner Monica Geller from Friends. Well, that was before I was quickly brought back to reality after tripping over the pile of staging items I had to shove out of the way to do this project in the first place.

Finally, I painted the top piece of trim with my unbelievably and shockingly perfect leftover amount of trim paint in that mason jar followed by an application of white paintable caulking.

I think the hubs was proud!

MHM came home right about the time that I was applying the caulking. Even he pointed out that our meticulous carpenter friend who finished our basement and also completed our original home renovations would be proud of my caulking skills. After all, he is the one who taught me that not-so-fun skill (but I secretly sort of love caulking)!

So, even though we no longer have that spare room, I do now have a space where I can style and stage and store – and I can close the door when it’s a mess (which is most of the time). Here are some photos I tried out in front of the new wall.

painting hung on a brick wall

entry way with faux brick wall

purple and gold vanity desk in front of a faux brick wall

 

So, there you have it…my no-more-excuses-very-first-blog-post and, with any luck, we’ll both stick around long enough to write or read more of them! I hope this will help you gain confidence to go for it if you’re thinking of creating a feature wall like this in your home!

 

 

 

31 thoughts on “Our Faux Brick Wall Using German Schmear”

  1. Really like the finished wall! You did a great job, and it will work well for all displays. We almost chose the brick paneling for my she shed, but opted for pallets instead and I love it.

    1. Ohh that sounds super cool, Nancy! Thank you for taking time to respond to this blog post. I sincerely appreciate it!

  2. I’m so glad you chose the brick and gave such a detailed description. You did a fantastic job! I absolutely love the result and definitely want to try it. If you wanted some of the red brick to show through like you mentioned, what would you use as a top coat to seal it?

    1. I read that Polycrylic is good for this since it has a reputation for not yellowing. It could be sprayed on with a paint sprayer but I don’t see why you couldn’t paint it on as well. Thank you, by the way, for the feedback!

  3. I just did one of these walls in my bedroom and I’m not happy at all with it. The visible seams are driving me crazy as they are so visible. I knew I should not have caulked. I was thinking of possibly painting it a darker solid color (gray) and then white washing over that. Thought?

    1. Oh no! That stinks! But in full transparency, I have yet to see what MAY happen down the road at the seams… I’m not sure with any settling that might occur, if I’ll start to see them from further away or not. I figured this was the best place to test it out. I could end up regretting the decision at some point to not caulk the seams but for now I’m glad I did not. I think your idea is a good one! Paint is pretty forgiving! If you want the red to show through, you might even be able to try painting the wall a dark brick red color then rubbing on some other color variations on random bricks to go back to the feel of a regular brick wall to start and then attempt the drywall compound process over that? I think the gray would be cool, too… to have the feel of more of a gray brick peeking through. Regardless, it may be more work, but there is usually always a way to use paint to remedy a situation like this! Good luck!

  4. I thought it was s good idea, I even kinda liked the red, but love the way it looks so bright! Definitely will make your home decorating items stand out! And your right go with your gut!, no second guessing ! Lol

    1. I definitely want to do another one somewhere that I can let the red stand out a lot more… I love shiplap but hope this will stand the test of time. Thank you, Eileen!

  5. It’s like you have been writing blog posts forever. You are a natural. Kinda makes me want to tackle a few projects of my own.

  6. You’ve motivated me and can’t wait to start a wall that needed something but I wasn’t sure what. German Schmear it is!
    Thanks Laura for the inspiration you can DIY!

  7. Great job! I’m glad you went with the brick – nothing against shiplap, but I’m partial to a brick feature wall myself (want to do one in my next place). Btw, I secretly love caulking too! Glad I’m not the only weirdo, lol. And I just love the imagery of you finding that paint, angels singing, and then tripping over a pile of stuff. Totally saw it like a sitcom in my mind, lol, and totally something that would happen to me. Great first post, enjoyed it!

    1. Oh, thank you, Yvonne! That means a lot coming from an experienced blogger! And, yep… the tripping thing is an unfortunate side effect of my entire life as it is these days… I’m glad you got a kick out of that part and could relate!

  8. I loved this after I saw the Gaines do it on the exterior of a house they were doing. It would be great to update a red brick fireplace. Thanks for sharing. Your wall looks great.

Leave a Reply

Your email address will not be published. Required fields are marked *